Geekvape Z Series Coil UAE | Mesh & Dual Replacement Coils

Product Overview

The Geekvape Z Series Coil is the replacement coil range built for Geekvape’s Z (Zeus) Sub Ohm Tank and the kits it ships inside of — including the Aegis X, Aegis Legend 2, and Obelisk 120 FC Z Kit. A coil is a consumable, not a one-time part: e-liquid residue and heat cycles gradually wear it down, so flavour and vapour production drop off well before the tank itself needs replacing. The Z Series exists specifically to bring that back to factory levels without buying a whole new tank.

It comes in four resistance builds — 0.15Ω, 0.2Ω, 0.25Ω, and 0.4Ω — spanning mesh single-coil and dual-coil constructions, each rated for a different wattage band. That range is the main reason to pick Z Series over a generic replacement: it covers everything from a tighter, flavour-forward pull up to genuinely large sub-ohm cloud production, on the same tank body. Each pack ships with 5 coils, so a single order covers several months of normal replacement cycles rather than one.

If you’re setting up a new tank rather than replacing a worn coil, Vapor Club’s pod & coils collection has compatible devices, including the Vaporesso Vibe Smart Pod if you want a simpler dual-mesh alternative to the Z Sub Ohm Tank setup.

Key Features

Which Resistance Should You Use?

Lower resistance and higher wattage generally means bigger vapour and a warmer, more open draw — that’s where the 0.15Ω and 0.2Ω builds sit. The 0.25Ω dual coil trades some peak wattage for a broader, more even heat spread across two coil strands, which some users find smoother on thicker e-liquids. The 0.4Ω sits at the milder end of the range, drawing less power for a tighter, longer-lasting session per tank of e-liquid. None of these are MTL coils — the whole Z Series is built for direct-lung, sub-ohm use, so check your tank’s airflow setting matches before installing.

Compatible Geekvape Devices

Z Series coils aren’t universal across every Geekvape product — they’re built specifically for the Z (Zeus) Sub Ohm Tank and the kits that ship with it:

• Geekvape Z Sub Ohm Tank / Zeus Sub-Ohm Tank
• Geekvape Aegis X Kit
• Geekvape Aegis Legend 2 Kit
• Geekvape Obelisk 120 FC Z Kit
• Geekvape Aegis Solo 2 S100 Kit
• Geekvape Aegis Max100 Kit

If your device isn’t on this list, don’t assume a Z Series coil will fit — Geekvape runs several coil families (Z, M, P, B Series) across its range, and installing the wrong one is the most common cause of a leaking or dry-hit tank. Check the coil deck marking on your existing coil, or your tank’s manual, before ordering a replacement.

Signs Your Coil Needs Replacing

A coil doesn’t fail all at once — it degrades gradually, and catching it early saves you a burnt-tasting tank in the meantime. Watch for:

• A noticeably flatter or slightly burnt taste compared to a fresh coil
• Reduced vapour output at the same wattage setting
• A gurgling sound or visible e-liquid pooling in the airflow
• Vapour production that feels inconsistent puff to puff

None of these automatically mean the coil is dead — low e-liquid, a clogged airflow slot, or an incorrect wattage setting can cause the same symptoms. Rule those out first, and if the issue persists, swap the coil.

Why Buy the Geekvape Z Series Coil From Vapor Club?

• Authentic Geekvape stock, sourced through compliant UAE supply channels
• DED-licensed retailer, operating in the UAE since 2021
• Same-day delivery in Dubai for orders placed before 8PM
• 24-hour delivery to Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain
• Cash on delivery available across all seven emirates
• Free delivery on orders over AED 600

Browse the rest of Geekvape’s UAE lineup on the Geekvape brand page, or head back to the full pod & coils range if you’re comparing tanks before deciding which coil family to commit to.

Frequently Asked Questions

Which tanks and kits does the Z Series coil fit?

The Z Sub Ohm Tank / Zeus Sub-Ohm Tank, and the kits it ships in — Aegis X, Aegis Legend 2, Obelisk 120 FC Z Kit, Aegis Solo 2 S100, and Aegis Max100. It is not designed for Geekvape’s other coil families (M, P, or B Series pods).

What’s the difference between the 0.15Ω, 0.2Ω, 0.25Ω, and 0.4Ω versions?

They’re rated for different wattage bands and draw styles. 0.15Ω and 0.2Ω run hottest (70–90W) for maximum vapour, 0.25Ω is a dual-coil build for a broader, more even heat at 45–57W, and 0.4Ω is the mildest of the four at 60–70W for a longer-lasting, more efficient session.

How many coils come in one pack?

Five coils per pack, in your chosen resistance.

How long does one coil last?

It depends on usage frequency, e-liquid composition (sweeter or thicker e-liquids gunk up a coil faster), and the wattage you’re running it at. Most users get one to three weeks of regular use before flavour noticeably drops off.

Can I use nicotine salt e-liquid with these coils?

The Z Series is built for sub-ohm, direct-lung use with freebase e-liquid at lower nicotine strengths. Nic salts are generally too harsh at sub-ohm wattages and are better suited to a higher-resistance MTL pod like the VOOPOO Argus cartridges instead.