Vaporesso ARMOUR OCTA UAE

Product Overview Vaporesso ARMOUR OCTA

Vaporesso ARMOUR OCTA is a dual-18650 regulated vape device paired with Vaporesso’s iTank T tank. It has a maximum output of 220W and uses two 18650 batteries, which are sold separately. The device includes a 0.96-inch TFT display and USB Type-C charging. According to Vaporesso, the global version of the kit includes a 6ml iTank T, while the TPD version includes a 2ml tank.

ARMOUR OCTA is designed around a protective outer structure and several electronic protection features. Vaporesso lists water, dust, waterjet and shock resistance for the mod, along with battery voltage protection, charging temperature protection and overtime protection. These specifications are intended to provide additional protection during normal device use and transport.

ARMOUR OCTA Design and Dimensions

The ARMOUR OCTA measures 146.3 × 30.8 × 55mm. Its exterior uses a protective structure around the device and tank area, with a silicone surface intended to provide grip while handling the device. Vaporesso also describes a TPU tank cover and an anti-collision pad as part of the physical protection system.

Available finishes listed by Vaporesso include Dark Black, Titanium Grey, Vintage Green, Rally Blue, Rust Bronze and Aero White. Availability of individual colours can vary by market and seller.

220W Maximum Output

ARMOUR OCTA supports a maximum output of 220W. Power output is controlled through its regulated electronics and displayed on the integrated 0.96-inch TFT screen. The device is powered by two 18650 batteries, which are not included in the standard kit.

Because the ARMOUR OCTA uses external batteries, battery selection, installation and charging should follow the manufacturer’s instructions. Users should also check local regulations and product safety requirements before use.

iTank T and GTi Coils

The kit is supplied with Vaporesso’s iTank T. The global version is listed with a 6ml capacity, while the TPD version is supplied with a 2ml capacity. The package includes two GTi dual-mesh coils: a 0.2Ω GTi Dual Mesh Coil and a 0.4Ω GTi Dual Mesh Coil.

The pre-installed 0.2Ω dual-mesh coil is specified for a range of 60–75W, with 65W listed as its recommended setting. The 0.4Ω dual-mesh coil has a stated range of 50–60W, with 55W listed as the recommended setting.

The iTank T is also compatible with additional GTi coil options. Vaporesso lists 0.15Ω Dual Mesh, 0.15Ω Mesh, 0.2Ω Mesh, 0.4Ω Mesh and 0.5Ω Mesh options, with recommended wattage depending on coil resistance.

Protection Features

ARMOUR OCTA includes several protection systems. Vaporesso states that the mod has an IP68K-rated water-resistance specification and IP69K waterjet protection under its stated test conditions. The manufacturer lists resistance to immersion up to 1 metre for more than 30 minutes, along with resistance to high-pressure water jets. These ratings apply to the mod under specified laboratory testing conditions and should not be interpreted as a guarantee against every type of water exposure.

The device is also described as dust-resistant and tested for drop resistance from 1.2 metres across 26 angles. Vaporesso notes that these certifications and tests apply to the mod and were conducted under standardized third-party laboratory conditions.

Electronic protection includes voltage surge protection for external batteries and charging overheat protection. Vaporesso states that charging is stopped when the temperature exceeds 75°C. ARMOUR OCTA also uses an overtime protection system designed to cut output after a prolonged 10-second activation and can power off after repeated overtime triggers within two minutes.

Charging and Display

The ARMOUR OCTA uses a USB Type-C charging connection with a listed charging specification of DC 5V/2.5A. Battery information and operating information are presented through its 0.96-inch TFT display.

The charging port is covered by a silicone plug as part of the device’s protective design. Users should follow Vaporesso’s supplied safety instructions when charging or handling external batteries.

What’s Included

The global version of Vaporesso ARMOUR OCTA kit contains:

• 1 × ARMOUR OCTA Mod
• 1 × iTank T 6ml Dual Mesh Version
• 1 × GTi 0.2Ω Dual Mesh Coil, pre-installed
• 1 × GTi 0.4Ω Dual Mesh Coil
• 1 × Type-C charging cable
• 1 × refill silicone plug
• 2 × O-rings
• 1 × extra glass tube
• 1 × extra tank protector
• 1 × user manual and warranty card
• 1 × safety manual

The TPD version has a 2ml iTank T instead of the 6ml global-version tank. Product packaging and included components may vary according to regional version.

Vaporesso ARMOUR OCTA Specifications

Specifications above are based on Vaporesso’s published ARMOUR OCTA information.

Frequently Asked Questions

What is Vaporesso ARMOUR OCTA?

Vaporesso ARMOUR OCTA is a regulated dual-18650 vape device with a maximum output of 220W. It is supplied with an iTank T and GTi dual-mesh coils, depending on regional kit version.

Does ARMOUR OCTA include batteries?

No. The device requires two 18650 batteries, and Vaporesso states that the batteries are not included in the kit.

What tank comes with ARMOUR OCTA?

The global kit includes an iTank T with a listed 6ml capacity. The TPD version includes a 2ml iTank T.

Which coils are included?

The kit includes a pre-installed GTi 0.2Ω Dual Mesh Coil and a GTi 0.4Ω Dual Mesh Coil.

What is the maximum power of ARMOUR OCTA?

The published maximum output is 220W.

Is ARMOUR OCTA water resistant?

Vaporesso lists IP68K/IP69K-related water and waterjet protection specifications for the mod under its stated laboratory test conditions. The manufacturer also notes dust and shock protection.

Important Product Information

Vaporesso ARMOUR OCTA is an adult-use vaping product. Vaporesso states that products containing nicotine carry an addiction warning. Check applicable UAE laws and age requirements before purchasing or using vaping products. Follow the manufacturer’s safety instructions, particularly when using external 18650 batteries.